Having a wet bar at home can add additional finesse and practicality. A wet bar is a wooden counter for serving alcoholic beverages that has a water sink to facilitate the preparation of cocktails and subsequent cleaning.
Table of ContentsToggle
The construction of a wet bar in your kitchen adds functionality where space and access to water are available.
Find an area in your kitchen where you would like to install a wet bar. The available space will determine how large a pre-built independent kitchen cabinet can acquire. Space is often left at the end of a long kitchen cabinet to install a dishwasher. If this space is available, it can function as a wet bar. Some kitchen designs also include cutouts or gaps for small dining areas or side tables. Once you have examined your options, you can start the design.
While there are several components that can improve your wet bar, water supply is the main function. Be sure to locate your bar where you can easily run or take advantage of an existing water supply. Take advantage of the nearest water supply to make your connection. Be sure to provide both cold and hot deliveries along with drainage problems.
Keep reading Space Design In The Interior Of A Room Or Apartment
Purchase a ready-to-use independent kitchen cabinet, configured according to the space requirements at your local home improvement center. Make sure there is enough space underneath to accommodate the pipes, such as hot water pipes and also drain pipes. Also secure a countertop by choosing any material that suits your taste, such as granite slabs, tiles, wood, Formica or any other waterproof material. Be sure to purchase the necessary plumbing materials and accessories, such as a sink and faucets.
Install your prefabricated cabinet once you have all the water connections in place. With a pencil and a level, mark a parallel line through the wall about 3 inches from the floor. Measure the distance between this line and the floor and write it down. Now measure 34.5 inches and mark a level line at this point through the wall to locate the top of the cabinets.
Install a 1 × 3 as a temporary support rail by screwing it into a found wall stud.
Use wooden wedges under the bottom of the cabinet until you get a level position. Attach the cabinet to the wall studs with a drill and wood screws. Trim the wooden wedges to provide a clean appearance. Remove the temporary support rail.
After installing the countertops, mark the areas for the sink and tap holes, if necessary. Use a paper template working with stone or granite. If tiled, also cut pieces for aboard. Once the countertop is installed and the holes are cut, place the sink on top. Make all connections.
Spot or paint the cabinet if you buy an unfinished item. Be sure to clean the countertop and sink of any excess grout, adhesive or putty before placing selected bar items, such as glasses, bottle racks, bottle openers or other items on top.
You may also like to read: What is a Rain Chain? Advantages and Disadvantages with Original Ideas